Circuit/System Testing: P0826
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect the fuse in the ignition 3 voltage circuit for an open.
- If the fuse is Open, test the ignition 3 and the Tap/Up and Tap/down circuit for a short to ground.
- If the fuse is OK, test the ignition 3 and the Tap/Up and Tap/down signal circuit for an Open or Short to Voltage.
- Test the AT/DSC shift program switch for correct resistance value, 8.11-8.39 ohms.
- If the resistance is not within specifications, replace the switch assembly.
- If the resistance is within specifications, replace the control solenoid (w/body and TCM) valve assembly.