LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1143 (Seat Heating System & Seat Cooling System) >> Repair Instructions >> Driver Seat and Passenger Seat Cushion Heater Replacement

Driver Seat and Passenger Seat Cushion Heater Replacement

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Driver Seat and Passenger Seat Cushion Heater Replacement
GM1969515Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Remove the front seat. Refer to Front Seat Replacement - Bucket .
  2. Remove the front seat adjuster switch bezel. Refer to Driver Seat and Passenger Seat Adjuster Switch Bezel Replacement .
  3. Remove the front seat inner recliner finish cover. Refer to Driver Seat and Passenger Seat Inner Recliner Finish Cover Replacement .
1 Seat Cushion Cover

Procedure

  1. Disengage the j-channel retainers from the seat cushion frame.
  2. Disconnect the blower from the seat cushion pad.
  3. Disconnect the electrical connectors that attach to the seat cushion, if equipped.
  4. Remove the seat cushion cover and pad from the seat cushion frame as an assembly.
  5. Pull the cover away from the pad to disengage the retainers
2 Front Seat Cushion Heater
Procedure: 
Remove the seat cushion heater from the seat cushion pad by sliding it through the seat cushion pad.
scientia non olet · About LEMON Manuals