LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1119 (Rear Suspension System) >> Repair Instructions >> Wheel Stud Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
    3. Fig 1: View of Tool J 43631
    GM649304Courtesy of GENERAL MOTORS CORP.
  3. Remove the wheel bearing/hub assembly. Refer to Rear Wheel Bearing and Hub Replacement .
  4. Using J 43631  remove the wheel stud from the wheel bearing.
scientia non olet · About LEMON Manuals