LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1119 (Rear Suspension System) >> Repair Instructions >> Shock Absorber Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat back. Refer to Rear Seat Back Replacement .
  2. Move the sound insulator away from the shock tower.
  3. Fig 1: Identifying Upper Shock Mounting Nuts
    GM802116Courtesy of GENERAL MOTORS CORP.
  4. Remove the upper shock mounting nuts.
  5. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  6. Fig 2: View of Lower Shock Mounting Bolt
    GM802115Courtesy of GENERAL MOTORS CORP.
  7. Remove the lower shock mounting bolt.
  8. Fig 3: View of Shock Absorber Assembly
    GM802117Courtesy of GENERAL MOTORS CORP.
  9. Remove the shock from the vehicle.