LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1112 (Engine Mechanical - 3.6L (2 Of 6)) >> On-Vehicle Repair Instructions (1 Of 2) >> Engine Mount Replacement - Right Side (W/AWD) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Engine Mount Lower Retaining Nuts
    GM1067552Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the right engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side (w/RWD)  or Engine Mount Bracket Replacement - Right Side (w/AWD) .
  3. Remove the right side front axle shaft. Refer to Front Wheel Drive Shaft Replacement - Right Side .
  4. Remove the upper engine mount retaining nut.
  5. Remove the lower engine mount retaining nut.
  6. Using the engine support fixture, raise the engine enough to remove the engine mount.
  7. Remove the engine mount from the vehicle.
scientia non olet · About LEMON Manuals