LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1109 (Battery, Charging System And Starting System) >> Repair Instructions >> Generator Bracket Replacement (LY7) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Generator Bracket Retaining Bolts & Bracket
    GM887707Courtesy of GENERAL MOTORS CORP.
  1. Turn the ignition OFF.
  2. Remove the generator. Refer to Generator Replacement (LY7) .
  3. Remove the coolant inlet pipe lower bolt from the generator bracket.
  4. Remove the belt tensioner. Refer to Water Pump and Generator Belt Tensioner Replacement .
  5. Remove the generator bracket bolts.
  6. Remove the generator bracket.
scientia non olet · About LEMON Manuals