LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1107 (Power Steering System) >> Repair Instructions >> Power Steering Pump Pulley Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air conditioning compressor and power steering pump belt from the power steering pump pulley. Refer to Air Conditioning Compressor and Power Steering Pump Belt Replacement .
    2. Fig 1: View Of Power Steering Pump Pulley Remover
    GM649303Courtesy of GENERAL MOTORS CORP.
  2. Use remover J 25034-C  to remove the power steering pump pulley.
scientia non olet · About LEMON Manuals