LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1103 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Front Side Door Hinge Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .
  2. Fig 1: View Of Fender Sound Insulator
    GM738141Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Replace only one hinge at a time then repeat procedure for the second hinge, if needed.
  3. Remove the push-in fasteners securing the fender sound insulator to the front fender.
  4. Remove the fender sound insulator.
  5. Fig 2: View Of Front Door Hinges
    GM787975Courtesy of GENERAL MOTORS CORP.
  6. Mark the position of the hinge on the body.
  7. Support the door.
  8. Remove the hinge bolts (1) from the body.
  9. Remove the hinge bolts from the door.