LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1092 (Seat Hardware, Seat Trim And Upholstery) >> Repair Instructions >> Front Seat Replacement - Bucket >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disable the SIR. Refer to SIR Disabling and Enabling .
    2. Fig 1: View of Bucket Seat Assembly
    GM1969651Courtesy of GENERAL MOTORS CORP.
  2. Move the front seat forward in order to access the front seat track trim cover (1,2).
  3. Remove the seat track trim covers (1,2) from the seat track.
    4. Fig 2: View of Bucket Seat, Tracking and Belt Assembly
    GM1969652Courtesy of GENERAL MOTORS CORP.
  4. Remove the seat belt anchor trim cover (1).
    5. Fig 3: View of Bucket Seat Track Assembly
    GM1969650Courtesy of GENERAL MOTORS CORP.
  5. Remove the front seat bolts (2) from the front seat (1).
  6. Remove the front seat belt anchor from the seat. Refer to Seat Belt Retractor Pretensioner Replacement - Front .
  7. Disconnect the seat electrical connectors.
    8. Fig 4: View of Bucket Seat and Track Assembly
    GM1969649Courtesy of GENERAL MOTORS CORP.
  8. With the aid of an assistant, tilt the seat up in the rear and slide rearward to disengage the seat (1) from the floor to remove from the vehicle.
scientia non olet · About LEMON Manuals