Installation Procedure
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the spring, diaphragm and cover.
- Install the PCV cover screws.
Tighten: Tighten the screws to 4 N.m (35 lb in).
- Position the fuel filter assembly to the engine.
- Install the fuel filter bracket bolts.
Tighten: Tighten the bolts to 21 N.m (15 lb ft).
- Install the air cleaner outlet duct. Refer to Air Cleaner Assembly Replacement .
NOTE:
Refer to Fastener Notice
.