LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1072 (Engine Mechanical - 6.6L (2 Of 5)) >> Off-Vehicle Repair Instructions (1 Of 4) >> Crankshaft Balancer Removal >> Removal

Crankshaft Balancer Removal: Removal

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locking Flywheel Using J 44643
    GM660308Courtesy of GENERAL MOTORS CORP.
  1. Install J 44643  to lock the flywheel. See Special Tools .
    2. Fig 2: View Of Crankshaft Balancer & Bolt
    GM1334816Courtesy of GENERAL MOTORS CORP.
  2. Remove the crankshaft balancer bolt.
  3. Remove the crankshaft balancer.
scientia non olet · About LEMON Manuals