LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1044 (Engine Controls And Fuel - 4.8L, 5.3L, 6.0L, 6.2L, Or 7.0L - DTC P0010 To DTC P0230) >> DTC P0016 (w/LY6) >> Conditions for Setting the DTC (w/LY6)

Conditions for Setting the DTC (w/LY6)

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

The cam signal falling edge is more than minus 11 degrees or more than plus 14 degrees from the corresponding crank signal falling edge. This condition is equal to the camshaft gear being either advanced or retarded by 1 tooth.