Turbine Speed Sensor Removal

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: VSS And Bolt

Courtesy of GENERAL MOTORS CORP.

Remove the vehicle speed sensor bolt (1) that retains the turbine speed sensor (2) to the transmission case.
Remove the turbine speed sensor (2).
Remove the vehicle speed sensor O-ring (3) from the turbine speed sensor.