Output Speed Sensor Removal (2WD)
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the vehicle speed sensor bolt (1) that retains the output speed sensor (2) to the low and reverse clutch housing - 2WD.
- Remove the output speed sensor (2).
- Remove the vehicle speed sensor O-ring (3) from the output speed sensor.