Emblem/Nameplate Replacement
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Using a 0.004 mm (3/16 in) drill bit, drill through the rivet fastening the nameplate to the transmission case.
- Remove the nameplate and rivet.
- Using a new rivet (1) and a pop rivet gun, rivet the new nameplate (2) onto the transmission case.
IMPORTANT:
When replacing a nameplate, keep the original nameplate. Stamp the information from the original nameplate onto the replacement nameplate.