Removal Procedure

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Remove the engine coolant fan upper shroud, if equipped. Refer to Engine Coolant Fan Upper Shroud Replacement (Mechanical) or Engine Coolant Fan Upper Shroud Replacement (Automatic Transmission - Diesel) .
Remove the accessory drive belt. Refer to one of the following:
- For 4.3L engine, refer to Drive Belt Replacement .
- For 4.8L, 5.3L, 6.0L, and 6.2L engines, refer to Drive Belt Replacement - Accessory .

Fig 1: View Of Power Steering Pump Pulley Remover

Courtesy of GENERAL MOTORS CORP.

Use remover J 25034-C to remove the power steering pump pulley. See Special Tools .