LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1000 (Tires And Wheels) >> Repair Instructions >> Tire Rotation >> Removal Procedure >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation .
  2. Install the center caps, if equipped.
  3. Lower the vehicle.
  4. Check the tire pressure. Refer to the tire placard and adjust the tire pressure as necessary.
  5. Perform the tire pressure sensor learn procedure, if equipped. Refer to Tire Pressure Sensor Learn .
scientia non olet · About LEMON Manuals