Crankshaft Main Oil Seal Cover Gasket: Remove & Replace
WARNING: This page is about the Yukon Base, 4.8 V, 4WD, which is a different variant/trim than selected.
Includes: R&I Transmission and Flywheel and replace Rear Main Seal.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Base,4WD, Rear | 8.3 | 5.6 | B | |
| Additional Procedure: CRANKSHAFT MAIN OIL SEAL COVER GASKET: Remove & Replace: | ||||
| w/Skid Plate add | 0.3 | B | ||