Transmission Holding Fixture Installation

Tools Required

• J 3289-20  Holding Fixture Base Assembly
• J 8763-02  Holding Fixture. See Special Tools .
• J 38655  Holding Fixture Adapter. See Special Tools .

Fig 1: Installing Holding Fixtures On Transmission
Courtesy of GENERAL MOTORS CORP.
1. Install the J 8763-02  and the J 38655  onto the transmission assembly. See Special Tools .
2. Install the transmission assembly and the J 8763-02  into the J 3289-20  . See Special Tools .
3. Lock the J 8763-02  in place with the locking pin. See Special Tools .