LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2005 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4L80-E/4L85-E - Overhaul >> Repair Instructions >> Intermediate Clutch Assembly Installation

Intermediate Clutch Assembly Installation

    Fig 1: Installing Intermediate Clutch Plates
    GM334809Courtesy of GENERAL MOTORS CORP.
  1. Dip all of the intermediate clutch plates in DEXRON® III transmission fluid.
  2. Install the intermediate clutch wave plate (684) with the tangs facing down.
    3. IMPORTANT: Alternate the clutch plates, starting with the steel clutch plate (4 steel and 4 composite).
  3. Install the intermediate clutch plates (631, 632).
  4. Install the intermediate clutch backing plate (630).
    5. Fig 2: Installing Intermediate Clutch Backing Plate Retainer Ring
    GM334811Courtesy of GENERAL MOTORS CORP.
  5. Install the intermediate clutch backing plate retainer ring (629). The opening of the retainer ring (629) should be at the 9 o'clock position.
scientia non olet · About LEMON Manuals