LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2005 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 223 (Engine Mechanical - 3.6L (Ly7) (4 Of 6)) >> Off-Vehicle Repair Instructions - Part 2 >> Intake Manifold Assemble >> Upper Intake Manifold Assemble Procedure

Upper Intake Manifold Assemble Procedure

WARNING: This page is about a different car, the 2005 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Sight Shield Grommet
    GM1507468Courtesy of GENERAL MOTORS CORP.
  1. Install the sight shield grommet.
    2. Fig 2: View Of Sight Shield Ball Studs
    GM1507467Courtesy of GENERAL MOTORS CORP.
  2. Install the sight shield ball studs.

    Tighten:  Tighten the sight shield ball studs to 7 N.m (62 lb in).

    3. Fig 3: View Of Communicator Valve
    GM1507466Courtesy of GENERAL MOTORS CORP.
  3. Install the communicator valve.
  4. Install the communicator valve bolts.

    Tighten:  Tighten the communicator valve bolts to 10 N.m (89 lb in).

    5. Fig 4: View Of Barometric (BARO) Sensor
    GM1507465Courtesy of GENERAL MOTORS CORP.
  5. Install the barometric (BARO) sensor.
  6. Install the BARO sensor bolt.

    Tighten:  Tighten the BARO sensor bolt to 10 N.m (89 lb in).

    7. Fig 5: View Of Throttle Body
    GM1211064Courtesy of GENERAL MOTORS CORP.
  7. Install the NEW throttle body gasket.
  8. Install the throttle body.
  9. Install the throttle body bolts.

    Tighten:  Tighten the throttle body bolts to 10 N.m (89 lb in).

scientia non olet · About LEMON Manuals