LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2005 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Engine Mechanical - 3.6L (Ly7) (3 Of 6)) >> Repair Instructions (On-Vehicle - Part 2 And Off-Vehicle - Part 1) >> Off-Vehicle Repair Instructions - Part 1 >> Intake Manifold Removal

Intake Manifold Removal

WARNING: This page is about a different car, the 2005 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Brake Booster Hose
    GM946063Courtesy of GENERAL MOTORS CORP.
  1. Disconnect and remove the brake booster hose from the upper intake manifold.
    2. Fig 2: View Of Intake Manifold Brace & Bolts
    GM1306504Courtesy of GENERAL MOTORS CORP.
  2. Remove the intake manifold brace bolts (1 and 2).
  3. Remove the intake manifold brace.
    4. Fig 3: View Of PCV Dirty Air Tube
    GM902887Courtesy of GENERAL MOTORS CORP.
  4. Remove the positive crankcase ventilation (PCV) tube assembly bracket bolts.
  5. Disconnect and remove the PCV tube assembly from the upper intake manifold and right camshaft cover.
    6. Fig 4: View Of EVAP Hose
    GM946068Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the (EVAP) hose from the upper intake manifold and EVAP solenoid.
    7. Fig 5: View Of EVAP Solenoid
    GM946076Courtesy of GENERAL MOTORS CORP.
  7. Remove the EVAP solenoid bolt.
  8. Remove the EVAP solenoid.
    9. Fig 6: View Of Intake Manifold Assembly
    GM1507461Courtesy of GENERAL MOTORS CORP.
  9. Remove the intake manifold bolts.
  10. Remove the intake manifold assembly.
    11. Fig 7: View Of Lower Intake Manifold Gasket
    GM902883Courtesy of GENERAL MOTORS CORP.
  11. Remove the lower intake manifold gasket.
scientia non olet · About LEMON Manuals