Exhaust Manifold Removal - Right (AWD)
WARNING: This page is about a different car, the 2005 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the right exhaust manifold heat shield bolts.
- Remove the right exhaust manifold heat shield.
- Remove the exhaust manifold bolts from the right cylinder head.
- Remove the right exhaust manifold.
- Remove and discard the exhaust manifold gasket from the right cylinder head.
- Remove the block heater cartridge.
- Remove the right knock sensor bolt.
- Remove the right knock sensor.
- Remove the crankshaft position sensor bolt.
- Remove the crankshaft position sensor.
- Remove and discard the crankshaft position sensor O-ring, if damaged.
- Remove the engine mount nut.
- Remove the engine mount.
- Remove the engine mount bracket bolts (1, 2).
- Remove the engine mount bracket.