Exhaust Manifold Removal - Left
WARNING: This page is about a different car, the 2005 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the engine coolant temperature (ECT) sensor.
- Remove the exhaust manifold bolts from the left cylinder head.
- Remove the left exhaust manifold.
- Remove and discard the exhaust manifold gasket from the left cylinder head.
- Remove the left knock sensor bolt.
- Remove the left knock sensor.
- Remove the left engine mount nut.
- Remove the left engine mount.
- Remove the left engine mount bracket bolt.
- Remove the left engine mount bracket.