LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2005 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Engine Mechanical - 3.6L (Ly7) (3 Of 6)) >> Repair Instructions (On-Vehicle - Part 2 And Off-Vehicle - Part 1) >> Off-Vehicle Repair Instructions - Part 1 >> Engine Flywheel Removal >> Tools Required

Tools Required

WARNING: This page is about a different car, the 2005 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.

EN 46106  Flywheel Holding Tool. See Special Tools .

    Fig 1: View Of Engine Flywheel
    GM902811Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine flywheel bolts and discard.
  2. Remove the engine flywheel from the crankshaft.
    3. Fig 2: View Of Tool EN 46106
    GM945978Courtesy of GENERAL MOTORS CORP.
  3. Remove the EN 46106  . See Special Tools .
scientia non olet · About LEMON Manuals