LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2005 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 174 (Engine Mechanical - 3.6L (Ly7) (2 Of 6)) >> On-Vehicle Repair Instructions - Part 1 >> Drive Belt Replacement - Power Steering And Air Conditioning >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Power Steering & A/C Drive Belt Routing
    GM1285183Courtesy of GENERAL MOTORS CORP.
  1. Install the drive belt to the crankshaft pulley, the idler pulley and the A/C compressor.
  2. Rotate the drive belt tensioner clockwise.
  3. Install the drive belt to the power steering pulley.
  4. Slowly release the drive belt tensioner.
    IMPORTANT: Ensure the drive belt is properly aligned and seated into the grooves of the accessory drive pulleys.
  5. Install the generator and water pump drive belt. Refer to Drive Belt Replacement - Generator and Water Pump .
scientia non olet · About LEMON Manuals