Hood Adjustment
WARNING: This page is about a different car, the 2005 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the fasteners (2) that secure the hood to the hood hinges (1).
- Adjust the hood in order to obtain an even gab on both sides between the hood and the fenders and so that the hood is flush with both fenders on the front edge.
- Tighten the fasteners (2) in order to secure the hood to the hood hinges (1).
Tighten: Tighten the fasteners to 9 N.m (80 lb in).
NOTE:
Refer to Fastener Notice in Cautions and Notices.