Charge Indicator Inoperative

Step	Action	Yes	No
Schematic Reference: Starting and Charging Schematics (Except HP2) or Starting and Charging Schematics (HP2)
1	Did you perform the Diagnostic System Check - Vehicle?	Go to Step 2	Go to Diagnostic System Check - Vehicle in Vehicle DTC Information
2	Turn ON the ignition, with the engine OFF. Does the battery charge indicator illuminate during the bulb check?	Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems	Go to Step 3
3	Replace the charge indicator bulb. Refer to Instrument Cluster Lamp Replacement in Instrument Panel, Gages and Console. Did you complete the replacement?	Go to Step 4	-
4	Operate the system in order to verify the repair. Did you correct the condition?	System OK	Go to Step 2