LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2005 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 4.8L, 5.3L & 6.0L (Repair Instructions - 2 Of 3) >> Off-Vehicle Repair Instructions - Part 2 >> Cylinder Head Removal - Left

Cylinder Head Removal - Left

    Fig 1: Cylinder Head Bolts
    GM1424500Courtesy of GENERAL MOTORS CORP.
  1. Remove the spark plugs from the cylinder head.
    2. IMPORTANT: The cylinder head bolts can NOT be used again. Install NEW cylinder head bolts during assembly.
  2. Remove the cylinder head bolts.
    3. NOTE: After removal, place the cylinder head on two wood blocks to prevent damage to the sealing surfaces.
  3. Remove the cylinder head.
    4. Fig 2: View Of Left Cylinder Head Gasket & Locator Pins
    GM63169Courtesy of GENERAL MOTORS CORP.
  4. Remove the gasket.
  5. Discard the gasket.
  6. Discard the cylinder head bolts.
scientia non olet · About LEMON Manuals