Tools Required

J 45849  Bearing Remover. See Special Tools .

Fig 1: View Of J 45849 & Flexplate Locator (RPO HP2)
Courtesy of GENERAL MOTORS CORP.
1. Install the J 45849  (1) into the flexplate locator (2). See Special Tools .
2. Using two wrenches, rotate the inner shaft of the J 45849  in order to remove the locator. See Special Tools .
Fig 2: View Of Flexplate Locator (RPO HP2)
Courtesy of GENERAL MOTORS CORP.
3. Remove the flexplate locator (147) from the rear of the crankshaft.