LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2005 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 4.8L, 5.3L & 6.0L (Repair Instructions - 1 Of 3) >> Repair Instructions (On-Vehicle And Off-Vehicle - Part 1) >> On-Vehicle Repair Instructions >> Engine Mount Replacement - Right >> Removal Procedure

Removal Procedure

  1. Remove the exhaust manifold. Refer to Exhaust Manifold Replacement - Right (4.3L Engine) or Exhaust Manifold Replacement - Right (4.8L, 5.3L & 6.0L Engines) or Exhaust Manifold Replacement - Right (6.6L (LLY) Engine) or Exhaust Manifold Replacement - Right (8.1L Engine) in Engine Exhaust.
    2. Fig 1: View Of Engine Mount-To-Engine Mount Bracket
    GM307275Courtesy of GENERAL MOTORS CORP.
  2. Remove the engine mount-to-engine mount bracket bolts.
  3. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  4. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  5. Remove the inner wheelhouse panel. Refer to Refer to Wheelhouse Panel Replacement in Body Front End.
  6. Remove the engine protection shield, if equipped. Refer to Engine Protection Shield Replacement in Frame and Underbody.
    7. IMPORTANT: DO NOT raise and/or support the engine by the crankshaft balancer, or oil pan.
  7. Raise and suitably support the engine using adjustable (screw type) jack stands.
    8. Fig 2: View Of Right Engine Mount
    GM307279Courtesy of GENERAL MOTORS CORP.
  8. Remove the engine mount to engine bolts.
  9. Remove the right engine mount.
scientia non olet · About LEMON Manuals