LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2005 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4L80-E/4L85-E - Overhaul >> Repair Instructions >> Speed Sensor Assembly Installation

Speed Sensor Assembly Installation

    Fig 1: Installing Input & Output Speed Sensors
    GM181639Courtesy of GENERAL MOTORS CORP.
  1. Install the input and output speed sensors (22), (output speed sensor plug-4WD) into the transmission case.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the input and output speed sensor bolts (23).

    Tighten:  Tighten the bolts to 11 N.m (97 lb in).

scientia non olet · About LEMON Manuals