LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2005 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 174 (Engine Mechanical - 3.6L (Ly7) (2 Of 6)) >> On-Vehicle Repair Instructions - Part 1 >> Engine Mount Replacement - Right (W/AWD) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Engine Mount Lower Retaining Nuts
    GM1067552Courtesy of GENERAL MOTORS CORP.
  1. Install the engine mount to the vehicle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the engine mount retaining nut.

    Tighten:  Tighten the nut to 80 N.m (59 lb ft).

  3. Install the right engine mount bracket. Refer to Engine Mount Bracket Replacement - Right (w/RWD) or Engine Mount Bracket Replacement - Right (w/AWD) .
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals