LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Yukon Denali >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Battery, Charging System And Starting System >> Diagnostic Information and Procedures >> Charge Indicator Always On

Charge Indicator Always On

Charge Indicator Always On

Step Action Values Yes No
1 Did you perform the Engine Electrical Diagnostic System Check? - Go to Step 2  Go to Diagnostic System Check - Engine Electrical 
2 Start the engine.
Does the battery charge indicator remain illuminated after the 5-second bulb check?
- Go to Step 3  Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems.
3
  1. Install a scan tool.
  2. With a scan tool, observe the Battery Voltage parameter in the Instrument Panel Cluster data list.
Does the voltage measure within the normal operating range?
10-15 V Go to Step 4  Go to Charging System Test (CS/AD/SI Generators) 
4 Replace the instrument panel cluster. Refer to Instrument Panel Cluster (IPC) Replacement in Instrument Panel, Gages and Console.
Did you complete the replacement?
- Go to Step 5  -
5 Operate the system in order to verify the repair.
Did you correct the condition?
- System OK Go to Step 2