LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Yukon Denali >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Removal Procedure

Removal Procedure

  1. Remove the instrument panel cluster (IPC) trim plate bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster .
  2. Remove the screws that retain the IPC to the instrument panel (I/P) assembly.
    3. Fig 1: Removing Instrument Panel Cluster Screws
    GM348794Courtesy of GENERAL MOTORS CORP.
  3. Remove the IPC (2) from the vehicle by tilting the bottom of the cluster outward.
  4. Disconnect the IPC harness (1) from the IPC.
    5. Fig 2: Removing Instrument Panel Cluster & Disconnecting Harness
    GM854865Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals