Fasten Safety Belt Indicator/Chime Inoperative
Fasten Safety Belt Indicator/Chime Inoperative
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: Seat Belt Schematics Connector End View Reference: Seat Belt Connector End Views |
|||
| 1 | Did you review the Diagnostic Starting Point - Seat Belts? | Go to Step 2 | Go to Diagnostic Starting Point - Seat Belts |
| 2 | Did you perform the Diagnostic System Check - Instrument Cluster ? | Go to Step 3 | Go to Diagnostic System Check - Instrument Cluster |
| 3 |
|
Go to Symptoms - Seat Belts | Go to Step 4 |
| 4 |
|
Go to Step 5 | Go to Step 6 |
| 5 | Replace the IPC. Refer to Instrument Panel Cluster (IPC) Replacement
in Instrument Panel, Gages and Console. Did you complete the replacement? |
Go to Step 11 | - |
| 6 |
|
Go to Step 7 | Go to Step 8 |
| 7 | Replace the LF seat belt switch. Refer to Seat Belt Buckle Replacement - Front . Did you complete the replacement? |
Go to Step 11 | - |
| 8 | Test the signal circuit of the seat belt switch for an open or high resistance. Refer to Circuit Testing
and Wiring Repairs
in Wiring Systems. Did you find and correct the condition? |
Go to Step 11 | Go to Step 9 |
| 9 | Test the ground circuit of the seat belt switch for an open or high resistance. Refer to Circuit Testing
and Wiring Repairs
in Wiring Systems. Did you find and correct the condition? |
Go to Step 11 | Go to Step 10 |
| 10 | Replace the body control module (BCM). Refer to Body Control Module Replacement
in Body Control System. Did you complete the replacement? |
Go to Step 11 | - |
| 11 | Operate the system in order to verify the repair. Did you correct the condition? |
System OK | Go to Step 2 |