LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Jimmy 4D Utility, 4WD, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Trim Panel Replacement - Knee Bolster >> Removal Procedure

Removal Procedure

  1. Set the park brake.
  2. Block the wheels.
  3. Remove the left side instrument panel (I/P) sound insulator. Refer to Closeout/Insulator Panel Replacement - Left .
  4. Remove the lower I/P sound insulator. Refer to Closeout/Insulator Panel Replacement - Instrument Panel (I/P) Lower .
  5. Remove the park brake release cable from the park brake lever. Refer to Park Brake Release Handle Assembly Replacement in Park Brake.
  6. Remove the screw that retains the courtesy lamp to the knee bolster. Refer to Courtesy Lamp Replacement - Instrument Panel (Lower) in Lighting Systems.
    7. Fig 1: View Of Knee Bolster Trim Panel
    GM303362Courtesy of GENERAL MOTORS CORP.
  7. Remove the screws that retain the knee bolster trim panel to the I/P.
  8. Remove the knee bolster trim panel from the vehicle.
scientia non olet · About LEMON Manuals