LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Jimmy 4D Utility, 4WD, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Door Replacement - Instrument Panel (I/P) Compartment >> Installation Procedure

Installation Procedure

  1. Connect the electrical connector to the instrument panel compartment lamp and switch assembly.
  2. Fig 1: View Of Instrument Panel Compartment Bezel
    GM392773Courtesy of GENERAL MOTORS CORP.
  3. Install the storage compartment bezel to the instrument panel.
  4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  5. Install the screws that retain the instrument panel compartment bezel to the instrument panel.

    Tighten:  Tighten the screws to 1.9 N.m (17 lb in).

  6. Install the instrument panel storage compartment door to the instrument panel.
  7. Fig 2: View Of Instrument Panel Compartment Door Hinges
    GM392772Courtesy of GENERAL MOTORS CORP.
  8. Install the screws that retain the instrument panel compartment door hinges to the instrument panel.

    Tighten:  Tighten the screws to 1.9 N.m (17 lb in).

  9. Fig 3: View Of Instrument Panel Compartment Door
    GM313447Courtesy of GENERAL MOTORS CORP.
  10. Push the storage compartment into place.
  11. Install the right side instrument panel sound insulator. Refer to Closeout/Insulator Panel Replacement - Right .