Driver Information Center (DIC) Compass Inaccurate or C Displayed

Step	Action	Yes	No
Schematic Reference: Driver Information System Schematics
1	Did you perform the Driver Information Systems Diagnostic System Check?	Go to Step 2	Go to Diagnostic System Check - Driver Information Systems
2	Verify that the compass is inaccurate or that CAL or C is displayed. Does the system operate normally?	Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems	Go to Step 3
3	Turn the ignition ON, with the engine OFF. Is the compass display blank?	Go to Step 7	Go to Step 4
4	Is CAL or C displayed?	Go to Step 5	Go to Step 6
5	Perform the compass calibration procedure. Refer to Electronic Compass Calibration . Does the compass operate properly?	Go to Step 8	Go to Step 6
6	Perform the compass variance procedure. Refer to Electronic Compass Calibration . Does the compass operate properly?	Go to Step 8	Go to Step 7
7	IMPORTANT: Perform the compass calibration and variance procedure on the replacement DIC. Replace the DIC. Refer to Driver Information Center Module Replacement .Did you complete the replacement?	Go to Step 8	-
8	Operate the system in order to verify the repair. Did you correct the condition?	System OK	Go to Step 2