LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Envoy RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Trim Panel Replacement - Knee Bolster >> Removal Procedure

Removal Procedure

  1. Remove the left closeout/insulator panel. Refer to Closeout/Insulator Panel Replacement - Left .
    2. Fig 1: Locating Knee Bolster Trim Panel
    GM712827Courtesy of GENERAL MOTORS CORP.
  2. Remove the 4 trim panel retaining screws.
  3. Release the clips that retain the trim panel to the IP.
  4. Remove the trim panel from the IP.
scientia non olet · About LEMON Manuals