LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Envoy RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Trim Pad Replacement - Instrument Panel (I/P) Upper >> Removal Procedure

Removal Procedure

  1. Remove the windshield pillar garnish moldings. Refer to Garnish Molding Replacement - Windshield Pillar in Interior Trim.
    2. Fig 1: Removing/Installing Trim Pad - Instrument Panel (I/P) Upper
    GM712816Courtesy of GENERAL MOTORS CORP.
  2. Starting at the outboard edges, release the trim pad retaining clips.
    3. Fig 2: Removing/Installing Ambient Light Sensor
    GM729432Courtesy of GENERAL MOTORS CORP.
  3. Rotate the ambient light sensor counter-clockwise 1/4 turn in order to release the sensor from the trim pad.
  4. Remove the trim pad from the vehicle.
    5. IMPORTANT: Cover the windshield defrost vents with clean shop rags.
  5. Disconnect the electrical connector from the ambient light sensor and retain the sensor for installation.
scientia non olet · About LEMON Manuals