LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Envoy RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Closeout/Insulator Panel Replacement - Left >> Removal Procedure

Removal Procedure

    Fig 1: Removing/Installing Closeout/Insulator Panel - Left
    GM712800Courtesy of GENERAL MOTORS CORP.
  1. Remove the 2 screws that retain the insulator panel to the instrument panel (I/P).
  2. Release the insulator panel retaining clip from the I/P substrate.
  3. Lower the insulator panel.
    4. Fig 2: Removing/Installing DLC At Closeout/Insulator Panel - Left
    GM865707Courtesy of GENERAL MOTORS CORP.
  4. Remove the 2 data link connector (DLC) retaining screws.
  5. Remove the DLC from the insulator panel.
  6. Remove the splice pack from the insulator panel.
  7. Remove the hazard and turn signal flasher from the insulator panel. Refer to Hazard and Turn Signal Flasher Replacement in Lighting Systems.
  8. Remove the insulator panel from the I/P.
scientia non olet · About LEMON Manuals