LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Envoy RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Closeout/Insulator Panel Replacement - Instrument Panel (I/P) Lower (GMC/Chevrolet) >> Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Closeout/Insulator Panel - Instrument Panel (I/P) Lower (GMC/Chevrolet)
    GM718760Courtesy of GENERAL MOTORS CORP.
  1. Install the closeout panel to the vehicle.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the 4 screws that retain the closeout panel to the IP.

    Tighten:  Tighten the screws to 1.9 N.m (17 lb in).

  4. Install the floor console. Refer to Console Replacement