LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Envoy 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Trim Pad Replacement - Instrument Panel (I/P) Upper >> Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Ambient Light Sensor
    GM729432Courtesy of GENERAL MOTORS CORP.
  1. In order to install the ambient light sensor to the trim pad, rotate the sensor clockwise 1/4 turn ensuring the retaining tabs are fully seated.
    2. Fig 2: View Of Instrument Panel (I/P) Upper Trim Pad
    GM718025Courtesy of GENERAL MOTORS CORP.
  2. Position the trim pad to the IP.
  3. Connect the electrical connector to the ambient light sensor.
  4. Remove the shop rags from the windshield defrost vents.
    5. Fig 3: Removing/Installing Trim Pad - Instrument Panel (I/P) Upper
    GM712816Courtesy of GENERAL MOTORS CORP.
  5. Align the locating stems to the IP substrate.
  6. Install the trim pad by seating the retaining clips to the IP substrate.
  7. Install the windshield pillar garnish moldings. Refer to Garnish Molding Replacement - Windshield Pillar in Interior Trim.
scientia non olet · About LEMON Manuals