LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Envoy 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Removal Procedure

Removal Procedure

  1. Remove the left closeout insulator panel. Refer to Closeout/Insulator Panel Replacement - Left .
  2. Remove the knee bolster trim panel. Refer to Trim Panel Replacement - Knee Bolster .
  3. Remove the instrument panel cluster (IPC) bezel, Chevrolet only. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster (Chevrolet)  or Bezel Replacement - Instrument Panel (I/P) Cluster (GMC/Oldsmobile/Buick) .
  4. Remove the instrument panel (I/P) accessory trim plate, GMC or Oldsmobile only. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory (GMC)  or Trim Plate Replacement - Instrument Panel (I/P) Accessory (Oldsmobile/Buick) .
    5. Fig 1: Removing/Installing Instrument Panel Cluster (IPC)
    GM692029Courtesy of GENERAL MOTORS CORP.
  5. Remove the screws retaining the IPC to the I/P.
  6. Partially remove the IPC from the I/P in order to gain access to the electrical connector.
  7. Disconnect the electrical connector from the IPC.
  8. Remove the IPC from the I/P.
scientia non olet · About LEMON Manuals