LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Envoy 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Console Storage Bin Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Console Storage Bin
    GM741607Courtesy of GENERAL MOTORS CORP.
  1. Install the storage bin to the console.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the 6 screws that retain the storage bin to the console.

    Tighten:  Tighten the screws to 2.5 N.m (22 lb in).

  3. Install the rubber mats covering the retaining screws.
  4. Close the storage bin cover.
scientia non olet · About LEMON Manuals