LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Envoy 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Closeout/Insulator Panel Replacement - Right >> Removal Procedure

Removal Procedure

    Fig 1: Removing/Installing Closeout/Insulator Panel - Right
    GM712812Courtesy of GENERAL MOTORS CORP.
  1. Remove the 2 screws that retain the insulator panel to the instrument panel (IP).
  2. Partially remove the insulator panel.
  3. Remove the electrical connector retaining clip from the back side of the insulator panel if equipped.
  4. Remove the insulator panel from the vehicle.
scientia non olet · About LEMON Manuals