LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Yukon Denali >> Repair and Diagnosis >> External Pages >> Different car >> Section 442 (Wiring Systems (Diagnostic Information And Procedures)) >> Diagnostic Information and Procedures >> Using Fused Jumper Wires

Using Fused Jumper Wires

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required 

J 36169-A  Fused Jumper Wire. See Special Tools and Equipment .

IMPORTANT: A fused jumper may not protect solid state components from being damaged.

The J 36169-A  includes small clamp connectors that provide adaptation to most connectors without damage. See Special Tools and Equipment . This fused jumper wire is supplied with a 20-A fuse which may not be suitable for some circuits. Do not use a fuse with a higher rating than the fuse that protects the circuit being tested.

scientia non olet · About LEMON Manuals