LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Yukon Denali >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Removal Procedure

Removal Procedure

  1. Remove the instrument panel (I/P) cluster trim plate bezel. Refer to BEZEL REPLACEMENT - INSTRUMENT PANEL (I/P) CLUSTER  .
  2. Remove the screws that retain the I/P cluster to the I/P assembly.
    Fig 1: Removing Screws That Retain Instrument Panel Cluster To Instrument Panel Assembly
    G01458122Courtesy of GENERAL MOTORS CORP.
  3. Remove the I/P cluster (2) from the vehicle by tilting the bottom of the cluster outward.
  4. Disconnect the I/P cluster harness (1) from the I/P cluster.
    Fig 2: Removing Instrument Panel Cluster From Vehicle
    G01458123Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals