LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Yukon Denali >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Instrument Panel (I/P) Trim Panel Replacement - Lower >> Removal Procedure

Removal Procedure

  1. Remove the instrument panel (I/P) cluster trim bezel. Refer to BEZEL REPLACEMENT - INSTRUMENT PANEL (I/P) CLUSTER  .
  2. Remove the center console, if equipped. Refer to CONSOLE REPLACEMENT (WITH CONSOLE MOUNTING BRACKET)  or CONSOLE REPLACEMENT (W/O CONSOLE MOUNTING BRACKET)  .
  3. Open the I/P compartment door.
  4. Remove the bolts retaining the lower trim panel to the I/P assembly.
    Fig 1: Removing Bolts Retaining Lower Trim Panel To Instrument Panel Assembly
    G01458145Courtesy of GENERAL MOTORS CORP.
  5. Disconnect all of the electrical connectors (1, 2, 3).
  6. Remove the lower trim panel from the I/P assembly.
    Fig 2: Removing Electrical Connectors & Lower Trim Panel From Instrument Panel Assembly
    G01458146Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals